perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 16 (click to view)
� press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated. Storing programme types Each of the preset buttons 1-6 has been assigned one programme type at the factory. If desired, you can also replace these with other available programme types. To do so, make sure that "PTY" lights up in the display. � If necessary, press the PTY button to switch on the function. � Select a programme type using buttons <<>> and � hold down the desired preset button (16) until you hear a beep. Now the selected programme type can be recalled by pressing this preset as long as "PTY" lights up in the display.
Scanning stations with PTY SCAN Important: "PTY" must appear in the display. � Press SCA. All of the stations in your current reception area offering the selected programme type will be scanned. To switch off PTY-SCAN: � Press SCA again. PTY priority Situation: PTY is switched on and lights up in the display. No station offering the selected programme type can be found currently in your reception range (with seek tuning or scan). The set will switch back to the station previously tuned into. As soon as it is possible to receive a programme in the broadcast network with the PTY selected, the radio will switch over to the corresponding station for the duration of the programme. Example: Station playing: NDR3. "PTY" lights up in the display. Programme type "POP" selected. Seek tuning is started.
- No station with "PTY-POP" can be found. - The display shows "NO PTY" and - automatically switches back to NDR3. - NDR2 airs a "PTY-POP" programme. - The radio will switch to the linked station NDR2 for the duration of the "POP" programme. During cassette or CD operation, the set will also switch to the radio programme if the selected PTY becomes available within the broadcast network. After the PTY programme has ended the system will switch back to the previous mode (radio, cassette or CD). Note: As already mentioned, these functions are only supported by a limited number of RDS stations at the present time.
39
PORTUGU�S ESPA�OL SVENSKA NEDERLANDS ITALIANO FRAN�AIS ENGLISH DEUTSCH
